On touching the aluminum end of the RED Add-A-Fuse cable, the voltmeter should display a voltage reading of either +/- 12.0V or +/- 24.0V, supplying constant power to the dash cam. Turn off the car key and pull it out before testing constant fuse installation. If you find the identified fuse slot with an existing fuse fitted in it, then slip it into the second slot of the piggyback fuse tap within the correct orientation.īefore finally crimping the Add-A-Fuse taps to the fuse slots, recheck the connection using the included voltmeter in the hardwire kit, ensuring a perfect installation. The hardwire kit cables come pre-installed in the first slot. The Add-A-Fuse fuse taps have two fuse slots. And the YELLOW Add-a-fuse cable to the ACC fuse slot in the correct INPUT and OUTPUT orientation. Once you have figured out the INPUT and OUTPUT sides of the fuse slots, it's time to insert the RED Add-a-fuse cable to the constant (always HOT) fuse slot. Fit the RED & YELLOW Fuse Taps to the respective Slots. And make sure the key is turned off and removed while testing the constant (Always HOT) fuse to identify the correct fuse slot.ĥ. That means if you are testing the ACC fuse, confirm that the key is turned to ACC position before testing. NOTE: Ensure that your vehicle’s key is appropriately positioned to power up the fuse slot you are testing, giving a correct voltage reading. The voltage OUTPUT side will display 0.0V ( because no current passes). If a reading of +/-12.0V / 24.0V or near appears on your voltmeter, mark it as voltage INPUT side. It can be effortlessly determined using the included voltmeter in our hardwire kit.īegin by testing each side of the fuse slot connector one at a time. Refer to your vehicle’s owner’s manual to determine the suitable Piggy-Back Fuse Tap for your car/fleet’s fuse box.īefore connecting the piggyback fuse-taps to the fuse slot, you must identify the slot's voltage INPUT and OUTPUT sides. It has many variations, including Mini, ATO, Micro, and Micro2. TIP: Use the voltage meter ( included in our 3-lead hardwire kit) or equivalent to figure out the constant and ACC/ignition-switched fuses.Īn Add-A-Fuse / Piggy-Back Fuse Taps make fuses safer and long-lasting. The ground metal bolt works to prevent electric shock. And an ACC/ignition switch fuse depends on the vehicle’s ignition – this fuse slot only provides power when you turn your car’s key turn to ACC position. The first wire (usually red) connects with a constant fuse, the second wire (typically yellow) goes into an ACC or ignition fuse, the last wire ( in the shape of a ring and black in color) fits into a metal ground bolt.Ī constant fuse is a fuse that stays on all the time, supplying power even when the vehicle’s engine is turned off. Most hardwire kits, including ROVE’s, come with three wires that connect to the fuse box. Fuses that deal with components like the AC, radio, sunroof, boot opener are generally safe to use. For example, prevent fuses in charge of airbags, stability control programs, horns, indicators. Always refer to the owner's manual to avoid fuse slots responsible for certain safety features within your vehicle. We recommend users to use fuse slots ratted between 10A-30A to have the dash cam get enough power supply for working. Generally, few of them have power even when the engine is turned off, while other fuses only get powered when the vehicle starts to run. The vehicle’s fuse box comprises numerous fuse slots. Determine the correct Fuse Slot for the Hardwire kit installation However, it is only possible with advanced dash cams like ROVE R3, R2-4K, or Stealth-4K with a WIFI feature or a smartphone application.ģ. It is always best to check live footage from your smartphone while installing the dash cam, ensuring the perfect camera angle. Hence, you don’t need to be concerned about obstructing your view further. The mirror itself blocks this specific area in the windscreen. We recommend mounting a dash cam in the middle of the windshield and right behind the rearview mirror. Moreover, many countries have specific restriction laws on dash cam mounting – to avoid those, check out your state’s traffic law guide. You don't want the dash cam to obstruct the front view sitting in the driver's seat. You need to be very careful about the mounting spot in the windshield. Most dash cams, including ROVE, use a suction cup or double adhesive mounting system to adhere to the windshield. By far, the windshield is the most popular place to install a dashboard camera. Decide a perfect place to mount the dash camįinding a perfect spot for a dash cam installation is essential and requires many trials in different positions.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |